Replacing The Battery - Fujitsu V1040 - LifeBook - Core 2 Duo 2.4 GHz User Manual

Replacing the Battery

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not
charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
1
Have a charged battery ready to install.
2
Shut down your notebook and disconnect the AC adapter.
3
While pushing the battery bay release latches towards the battery pack, lift the battery out of the bay using the
latches to lift it.
4
Insert a new battery into the bay, and press it down so that the latches click into place.
5
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
B
E SURE TO PLUG IN AN
BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED
AC A
USE AN
1
Plug an AC Adapter into the system and connect it to a power outlet.
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
DAPTER YOU WILL LOSE ANY UNSAVED FILES
55 - Lithium ion Battery
. T
HERE IS NO BRIDGE
.
. I
F YOU DO NOT