Hardware Features; Led Indicators; Hardware Installation; Before Starting - Efficient Networks SpeedStream 5667 User Manual

SpeedStream Dual USB/Ethernet Router User's Guide
Model 5667

Hardware Features

AAL and ATM Support
VCI 0-65535 address range
Connectors
ADSL interface: RJ-11
Ethernet interface: RJ-45
Console interface: 5-pin MiniDIN RS-232
USB Type B interface
Standards Compliance
DMT, ADSL

LED Indicators

After powering on the router, all LED indicator lights turn a solid green. The LED behavior will change
depending on the various connection states and data activity of the router. Refer to the table below for
details:
power
Off
Unlit
On
Solid
N/A
Blinking
Post failure
All
Blinking

Hardware Installation

Before Starting

Please collect the following information from your ISP before setting up the SpeedStream Dual
USB/Ethernet Router:
An ISP account (may include user name and password for PPPoE or PPPoA service)
IP address for your ISP's gateway and domain name servers (for non-PPP/non-DHCP services).
ISP authentication type or script (if not PAP/CHAP).
IP address and subnet mask (for fixed IP accounts only).
adsl act
DSL not DSL not
connected connected
Ready for data N/A
traffic
Searching for DSL traffic
signal flow
eth
Ethernet port not
connected; check Ethernet
cable connection if using
Ethernet interface
Ethernet port connected to
LAN
Ethernet traffic flow
10
usb
USB port not connected;
check USB cable
connection if using USB
interface
USB port connected to
host
USB traffic flow