Edimax PS-1206P User Manual page 67

1. Optionally, assign a name corresponding to the print
server's IP address. You can add this address to the
/etc/hosts file, by adding a line such as:
203.66.191.186
2. Create a spool directory for the printer in the same
directory where spool directories are normally kept on
the machine, such as /var/spool or /var/spool/lpd:
mkdir /var/spool/lpd/pserverd
chown daemon /var/spool/lpd/pserverd
chgrp daemon /var/spool/lpd/pserverd
chmod 775 /var/spool/lpd/pserverd
3. Add an entry to the host's /etc/printcap file, similar to
the following:
printer-name:\
:lp=:\
:rm=203.66.191.186:\
:rp=lpt1:\
:lf=/var/spool/lpd/pserverd.log:\
:sd=/var/spool/lpd/pserverd:\
:mx#0:
pserver
57