Edimax Wireless Broadband Router User Manual page 69

Client PC Service
Protocol
Port Range
Apply Changes
Reset
Click <Apply Changes> at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)
Example: Access Control
In the example below, LAN client A can only access websites that use Port
80. However, LAN client B is able to access websites and any other
service that uses ports between 80 and 999.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control
rule to work properly.
You can block the clients from accessing some
Internet services by checking the services you
want to block.
This allows you to select UDP, TCP or both
protocol type you want to block.
It can be assign up to five port ranges. The
router will block clients from accessing Internet
services that use these ports.
Click "Apply Changes" to save the setting.
Click "Reset" to clear all fields.
68