Edimax Wireless Broadband Router User Manual page 24

Use the following
IP address
IP Address
Subnet Mask
Gateway
User ID
Password
L2TP Gateway
MTU
Connection Type
Type in this MAC address in this section or use the
"Clone MAC Address" button to replace the WAN
MAC address with the MAC address of that PC
(you have to be using that PC for the Clone MAC
Address button to work). To find out the PC's MAC
address see Appendix A. (see Glossary for an
explanation on MAC address)
The ISP gives you a static IP to be used
to connect to the L2TP server.
This is the IP address that your ISP has given you to
establish a L2TP connection.
Enter the Subnet Mask provided by your ISP (e.g.
255.255.255.0)
Enter the IP address of the ISP Gateway
Enter the User Name provided by your ISP for the
PPTP connection. Sometimes called a Connection ID
Enter the Password provided by your ISP for the
PPTP connection
If your LAN has a L2TP gateway, then enter that
L2TP gateway IP address here. If you do not have a
L2TP gateway then enter the ISP's Gateway IP
address above
This is optional. You can specify the maximum size of
your transmission packet to the Internet. Leave it as it
is if you to not wish to set a maximum packet size.
If you select "Continuous", the router will always
connect to the ISP. If the WAN line breaks down and
links again, the router will auto-reconnect to the ISP.
If you select "Connect On Demand", the router will
auto-connect to the ISP when someone want to use
the Internet and keep connected until the WAN idle
timeout. The router will close the WAN connection if
the time period that no one is using the Internet
exceeds the "Idle Time".
23