Edimax BR-6225N User Manual page 85

ESSID
Site Survey
WLAN MAC
11Mbps for 802.11b clients, and maximum
54Mbps for 802.11g clients).
2.4 GHz (G): 2.4GHz band, only allows
802.11g wireless network client to connect this
router (maximum transfer rate 54Mbps).
2.4 GHz (B+G+N): 2.4GHz Band, Allows
802.11b, 802.11g, and 802.11N wireless clients.
It's recommends to select this band to maximize
compatibility.
This is the name of broadband router. You can
type any alphanumerical characters here,
maximum 32 characters. ESSID is used to
identify your own broadband router from
others when there are other broadband routers
in the same area. Default SSID is 'default', it's
recommended to change default ESSID value
to the one which is meaningful to you, like
myhome, office_room1, etc.
Click 'Select Site Survey' and a popup window
will appear. All reachable wireless access
points will be shown in the window. Select the
wireless access point you wish to connect from
the list, and click 'Done'. If the wireless access
point you wish to connect is not listed, you can
click 'Refresh' to rescan.
If you still can't find the wireless access point
you wish to connect, please move the
broadband router to the place nearer to the
access point you wish to connect.
Some wireless access points will only allow
clients with certain MAC address to
establish connection. In this case, you can
input the MAC address that will be accepted
by the wireless access point you wish to
connect here. You can also click 'Clone
85