Table of Contents
Advertisement
Fragment Threshold
RTS Threshold
Beacon Interval
Data Rate
Preamble Type
Broadcast ESSID
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Gaming Adapter.
"Fragment Threshold" specifies the maximum size of packet during the
fragmentation of data to be transmitted. If you set this value too low, it will
result in bad performance.
When the packet size is smaller the RTS threshold, the Gaming Adapter
will not use the RTS/CTS mechanism to send this packet.
The interval of time that this Gaming Adapter broadcast a beacon.
Beacon is used to synchronize the wireless network.
The "Data Rate" is the rate this Gaming Adapter uses to transmit data
packets. The Gaming Adapter will use the highest possible selected
transmission rate to transmit the data packets.
Preamble type defines the length of CRC block in the frames during the
wireless communication. "Short Preamble" is suitable for high traffic
wireless network. "Long Preamble" can provide more reliable
communication.
If you enable "Broadcast ESSID", every wireless station located within
the coverage of this Gaming Adapter can discover this Gaming Adapter
easily. Disabling "Broadcast ESSID" can provide better security.
27
Wireless LAN Access Point Configuration
Advertisement
Table of Contents
