Chapter 4 Web Configuration; Getting Started - Edimax EW-7206GAb User Manual

Chapter 4 Web Configuration

4.1

Getting Started

This Gaming Adapter provides web-based configuration tool allowing you to
configure from wired or wireless stations.
* The Web Configuration only when you have already set static IP to the
Gaming Adapter through Gaming Adapter Setup Wizard. Follow the
instructions below to get started configuration.
From Wired Station
1. Make sure your wired station is in the same subnet with the Gaming Adapter.
The default IP Address and Subnet Mask of the Gaming Adapter is:
Default IP Address: 192.168.2.1
Default Subnet: 255.255.255.0
Configure your PC to be in the same subnet with the Access Point.
1a) Windows 95/98/Me
1.
Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2.
Double-click Network icon. The Network window will appear.
3.
Check your list of Network Components. If TCP/IP is not installed, click the Add button to
install it now. If TCP/IP is installed, go to step 6.
4.
In the Network Component Type dialog box, select Protocol and click Add button.
5.
In the Select Network Protocol dialog box, select Microsoft and TCP/IP and then click the
OK button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
6.
After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from the list of
Network Components and then click the Properties button.
7.
Check each of the tabs and verify the following settings:
•
•
Bindings: Check Client for Microsoft Networks and File and printer sharing for
Microsoft Networks.
Gateway: All fields are blank.
Wireless LAN Access Point Configuration
20