Hardware Connections; Connect The Router Using Lan; Connect The Router Using Wireless Lan - TRENDnet TEW-432BRP - Wireless Router User Manual

54mbps 802.11g wireless firewall router

Hide thumbs Also See for TEW-432BRP - Wireless Router:

Table of Contents

Hardware connections

1. Plug in one end of the network cable to the WAN port of the Wireless Internet

Broadband Router.

2. Plug in the other end of the network cable to the Ethernet port of the xDSL or

Cable modem.

3. Use another network cable to connect to the Ethernet card on the computer

system; the other end of the cable connects to the LAN port of the Internet

Broadband Router. Since the Wireless Broadband Router has four ports, you can

connect up to four computers directly to the unit. There you do not have to buy a

switch to connect these computers since one Internet Broadband Router

functions both as a connection-sharing unit and as a switch.

1. Plug in one end of the RJ45 network cable to the xDSL/Cable Modem.

2. Plug in the other end of the RJ45 network cable to the Wireless Internet

Broadband Router WAN port.

Table of Contents