Linksys WUSB54GS User Manual page 17

Chapter 3
EAP-TLS
RADIUS - EAP-TLS
Login Name
Enter the login name of your wireless
network in the Login Name field.
Server Name
Enter the name of the authentication server
in the Server Name field (this is optional).
Certificate From the Certificate drop-down menu, select
the certificate you have installed to authenticate you on
your wireless network; if you want to use any certificate,
keep the default setting, Trust Any.
PEAP
RADIUS - PEAP
Login Name Enter the login name of your wireless
network in the Login Name field.
Password
Enter the password of your wireless network in
the Password field.
Server Name Enter the name of the authentication server
in the Server Name field (this is optional).
Wireless-G USB Network Adapter
Certificate From the Certificate drop-down menu, select
the certificate you have installed to authenticate you on
your wireless network; if you want to use any certificate,
keep the default setting, Trust Any.
Inner Authen.
Select the authentication method used
inside the PEAP tunnel.
Click Next to continue or Back to return to the previous
screen.
LEAP
If you selected LEAP, then enter the Username and
Password that will authenticate you on your wireless
network. Windows XP and 2000 users can also enable
LEAP CCKM, and select the Encryption, if they enabled
CCX2.0 on the Advanced Wireless Settings screen.
Username Enter the username used for authentication.
Password Enter the password used for authentication.
Confirm Enter the password again.
LEAP CCKM Windows XP and 2000 users can enable this
Cisco Central Key Management method if they enabled
CCX2.0 on the Advanced Wireless Settings screen.
Encryption Windows XP and 2000 users can select
an encryption method if they enabled CCX2.0 on the
Advanced Wireless Settings screen.
Click the Next button to continue, or click the Back button
to return to the previous screen.
Advanced Wireless Settings
This screen is for advanced users to enable CCX2.0.
Advanced WIreless Settings
CCX2.0
Cisco Compatible Extensions, a Cisco wireless
network protocol. Select Enabled from the drop-down
menu to use the function. Select Disabled to disable to
function.
Configuration
14