Insignia NS-42E570A11 Firmware Update page 3

5. Using your remote control arrow keys, make sure the "Yes" button is highlighted and press
enter/OK on the remote. The software update will then begin
Note: DO NOT TURN THE POWER OFF OR UNPLUG DURING THE UPDATE
Note: During the software update, a progress bar will appear displaying the progress of the
update; this update takes approximately one (1) minute.
6. Once the update has completed, a screen similar to the one shown below will appear:
7. Remove the USB flash drive (stick) from the TV.
8. Power off TV, and then unplug TV from wall socket (keep TV unplugged for 5‐10 seconds).
9. Plug TV back into wall socket, wait 5 to 10 seconds then power on TV.
10. Once the TV is powered up the process is complete.
Note: It is recommended that you erase/delete the update file from the USB flash drive using
your computer prior to using the USB flash drive again.
Note: You will need to reprogram your favorite channels and any custom settings that you may
have set up.
Note: If you experience any issues while performing this upgrade, call Insignia Customer Support
at (877) 467‐4289 for assistance.
March 2011