Insignia NS‐32L550A11 Update Instructions page 2

2. Insert the USB flash drive containing the firmware that was downloaded into the TV's USB
service port located on the side of the TV. Note: This port maybe covered by a rubber flap, you
may need to flip open the rubber flap (See photo below).
3. Turn the TV on using the remote control or power button on the side of the TV.
4. A screen similar to the one below will appear (Note: if there is no upgrade menu displayed; you
can turn your TV off, then turn the unit back on):
5. Using your remote control arrow keys, make sure the "Yes" button is highlighted and press
enter/OK on the remote. The software update will then begin
Note: DO NOT TURN THE POWER OFF OR UNPLUG DURING THE UPDATE
Note: During the software update, a progress bar will appear displaying the progress of the
update; this update takes approximately one (1) minute.
6. Once the update has completed, a screen similar to the one shown below will appear: