Control Panel - Samsung WA8585D1 User Manual

POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop,
and once again to restart after changing the procedure.
DELAY START BUTTON
Press this button when delay start washing is needed.
COURSE SELECT BUTTON
With every press of this button, the washing course changes;
DIGITAL BLANKET
FUNCTION SELECT BUTTON
With every press of this button, the function changes;
SOAK,WASH,RI NSE,SPI N
RINSE&SPIN WASH,RINSE,SPIN
WATER LEVEL SELECT BUTTON
According to the washload,select the water level ;
MEDIUM HIGH EXTRA LOW
WATER SUPPLY SELECT BUTTON
As you press this button, the type of water is selected as follows.
COLD COLD + HOT
REMAINING TIME INDICATOR LIGHT
The indicator light shows the remaining time (in minutes) of each wash cycle.
At the end of the cycle,the power automatically switches off.
WASHING FOR THE FIRST TIME
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:
1. Press the POWER button.
2. Pour a little detergent into compartment
3. Turn on the water supply to the washing machine.
4. Press the Start/Hold button.
This will remove any water from the manufacturer's test run remaining in the machine..

CONTROL PANEL

For more details, see control panel of your washing machine.
SPEEDY WOOL
WASH RINSE
LOW
HOT COLD
in the detergent drawer.
POWER
START/
HOLD
DELAY
START
COURSE
DIGITAL
FUNCTION
SPIN WASH&RINSE
WATER
LEVEL
WATER
SUPPLY
4