Installation And Maintenance; Place; For Washing Machines With Drain Pump; How To Connect The Water Supply Hose - Samsung WA167LD1 User Manual

Table of Contents

Advertisement

PLACE. . .

Leave a free space between the washing
machine and the wall of, at least, 10 cm.
Place the washing machine on a leveled
and firm surface to prevent noise and
vibration.
Adjust the adjustable legs to level it. Never
place the washing machine close to water.
Never place the washing machine in rooms with
vapors or exposed to the rain.
The humidity may destroy the electrical isolation
and lead to risk of electric shock.
Avoid direct sunlight or heaters.
As direct heat may damage the plastic and
electric parts, never place the washing machine
close to ovens, furnaces, etc. Never place it
under direct sunlight.

HOW TO CONNECT THE WATER SUPPLY HOSE

1. Remove the water supply
hose adapter.
2. With a Philips screwdriver,
loosen the three screws of
the adapter. The, take the
adapter and hold the parts
(a) and (b) leaving 5-mm
space, approximately,
between them.
3. Connect the adapter to the
water cock firmly screwing
the bolts.
Next, turn the part (b) in
the direction of the arrow
and join the parts (a) and
(b).
After finishing the connection, if water leaks through the hose, repeat the above-mentioned
steps. Use a conventional cock.
NOTE
If the cock is square, remove the spacer before introducing the cock in the adapter.

INSTALLATION AND MAINTENANCE

FOR WASHING MACHINES WITH
DRAIN PUMP
Remove the hose cap,
connect the drain hose.
Verify that the drain hose is
properly connected to the
drain outlet in the back of the
washing machine.
Install the drain hose,
approximately 90~100cm
above ground level.
5
hose cap
drain hose
4. Connect the water supply hose to
the adapter. Push the part (c) of
the water supply hose downward.
The sound of a "click" means that
the part (c) has been released and
the hose remained automatically
connected to the adapter.
5. Connect the other end of
the water supply hose to
the water inlet valve
located in the back of the
machine. Fully screw the
hose in the right direction.
If the water cock is threaded,
connect it to a hose fitting this
kind of cock.

Advertisement

Table of Contents
loading

Table of Contents