Table of Contents
Advertisement
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pump)
FUZZY COURSE
1. Put the laundry into the washer and push the POWER
button to on.
•
Fuzzy course button lights on.
2. Press START / HOLD button.
•
Measuring the weight of laundry, washer moves it's body
without water and then indicates adequate amount of
water and detergent.
•
The adequate temperature of water is automatically
selected.
3. Open the lid and put the detergent/ softener in proportion
to the water level indicated. Then close the lid.
- When you open the lid in operation, it stops washing
(But water supply will be continued).
- In case of using the hot water only, cold water is supplied
during the first 20 seconds to avoid damaging the laundry
by hot water.
- On it's operation in every course, washing time, rinsing
frequency & spinning time can be adjusted.
- With the press of the function button on water
temperature, the water temperature in washing/ rinsing
is selected manually in every course (except wool course).
- With the press of the super rinse button, additional
water is supplied in rinsing the laundry.
(except CLEAN TUB course)
HEAVY COURSE
(For Jeans or laundry
with heavy dirt)
1. Put the laundry in the washer and press the POWER
button to on.
2. Select HEAVY course button.
3. Press START/HOLD button.
Put the detergent/softener in proportion to the water level
and then close the lid.
•
Here adjusted soaking course during 20 minutes to
remove the heavy dirt at the collar of laundry (When
need more soaking, press wash button select 40
minute soaking time manually.
•
The washing board and tub spinning in the opposition
way gives great efficiency washing.
WASHING PROCEDURE
START/
POWER
HOLD
START/
POWER
HEAVY
HOLD
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
SPEEDY COURSE
( For laundries with light
dirt like towels in a short time)
1. Put the laundry in the washer and press the
POWER button to on.
2. Select SPEEDY course button.
3. Press START/HOLD button.
Put the detergent/softener in proportion to the
water level and then close the lid.
•
Spinning the washer board brings high energy
efficiency.
•
In case of heavy laundry, it automatically spin the
washer tub to improve the power of washing.
Note
- Measuring the weight of laundry, washer moves its body
without water in every courses, and then indicates
adequate water level and amount of detergent.
(except clean tub course)
- Every course automatically indicates the water temperature
and also it can be selected by pressing the water
temperature button as you want. (except wool course)
BLANKET COURSE
(For big laundry like quilts
or bedcovers)
1. Put the laundry in the washer and press the POWER
button to on.
2. Select BLANKET course button.
3. Press START/HOLD button.
Put the detergent/softener in proportion to the water level
and then close the lid.
•
Blanket may get stained with the detergent.
Therefore, detergent in the liquid detergent device
is suggested.
5
START/
POWER
SPEEDY
HOLD
START/
BLANKET
POWER
HOLD
Advertisement
Table of Contents
