Control Panel - Samsung SW1485Z1 User Manual

For more details, see control panel of your washing machine.
POWER
POWER BUTTON
•
Select it when you put the power to " ON " or " OFF ".
•
Automatically turned off after washing.
•
Automatically turned off without pressing any other
button for 10 minutes in power-off condition.
START/ HOLD BUTTON
•
Press it when you start or want to pause
DELAY START BUTTON
•
Use this function when you finish the washing on the
time you want.
•
Press power to " OFF " in order to cancel the
reservation.
WASH
WASH BUTTON
•
Use this function when you want to wash separately
or adjusting the washing time.(5 minutes ~ 20 minutes)
•
Keep pressing this button when choosing soak washing.
RINSE
RINSE BUTTON
•
Select this function when you want to rinse only and
change the rinsing frequency.
•
You can choose maximum 5 times.
SPIN
SPIN BUTTON
•
Select this button when you want to spin only and
adjust the spinning time (1minute ~ 7 minutes)
•
If you want to protect wrinkles in spinning, select this
button for 1 minute spinning.
•
If you select "Spin" only, there is a gap shown between
the timer for spinning and the timer for whole working,
which included more time for draining and holding.
LEVEL METER
•
Set it for the water drop to come in the center, moving
the adjustable legs.
SUPER RINSE BUTTON
•
Use this function when you want clean rinsing with
more of water than washing.
•
Available to rinse in one step more than the water level
of washing

CONTROL PANEL

DELAY
START
SUPER
RINSE
WATER TEMP BUTTON
•
Indicates the water temperature automatically,
but control it manually as occasion demands.
•
WASHING : Choose the temperature necessary
in washing.
•
RINSING : Choose the temperature necessary in
rinsing.
•
Alterable in the middle of working
Adjusting the water temperature automatically, you
should open the taps of hot water and cold water for
optimum washing.
In case of not opening the tap of hot water or the
hot water not being supplied, can not control the water
temperature and do washing with cold water only.
In case of wool course, cold water only is selected.
WATER TEMP INDICATOR
•
When washing / rinsing each course, indicates the
adequate water temperature automatically.
•
The temperature is indicated in 4 grades.
Hot water : Supply hot water only.
: Effective for heavy dirt and control in 35˚C~45˚C.
: Effective for activating the detergent and
control in 25~ 35˚C.
Cold water : Supply cold water only.
(There might be a difference in the water temperature
according to water pressure and temperature of hot water)
WATER LEVEL BUTTON
•
Water level is automatically indicated,
but you can adjust it.
•
Alterable in the middle of working.
WATER LEVEL DETERGENT INDICATOR
•
In proportion to the amount of laundry, the water level
and amount of detergent are automatically indicated.
•
Indicates water level in 10 grades.
MOVEMENT INDICATOR
•
Indicates the state of moving inside of clean tub.
•
Shows the water supply and the spinning direction
of washing board and tub.Indicates the selected washing
course and shows error in trouble.
TIME LEFT/ DELAY START/ ERROR SIGN INDICATOR
•
Indicates the left time until the end of the washing.
•
Indicates advance time
•
Indicates the trouble in the machine and take an action
for the error with them.
PROCEDURE INDICATOR
•
Indicates the procedure of washing, the remaining time
and remaining frequency.
•
In it's procedure, it flickers.
•
If you select the washing time more than 20 minute,
soak washing is indicated .
4
WASH RINSE
WATER
LEVEL