Troubleshooting; If You Have A Problem - Samsung SW7260 Operating Instructions Manual

THERMAL CUT-OUT PROTECTION
The vacuum cleaner is provided with a self-resetting thermal cut-out protection which
automatically shut off current on over heating.Overheating can be caused by blockage in the
filter, nozzle, tube or hose.After removing the cause and cooling the motor,vacuum cleaner
automatically start again.
6

TROUBLESHOOTING

- IF YOU HAVE A PROBLEM

PROBLEM
Cleaner doesn't run.
Poor job of dirt pickup.
Cord doesn't rewind fully
Motor runs but doesn't
suck up water.
Cover dust comes out.
CAUSE
Not firmly plugged in.
Clogged hose or filter,
tube, nozzle.
Check that the cord is not
twisted or wound unevenly.
Check the float in suction.
Doesn't break down.
7
REMEDY 0
Plug unit in firmly.
Remove the object.
Pull the cord out 2~3m and
push down the cord rewind
button.
Discard the water in the
bucket.
Insert it in the cleaner.