DJ68-00186H 0.0 3/20/03 5:22 PM Page 1 Operating Instructions VC-6000 SERIES VACUUM CLEANER Before operating this unit, please read the instructions carefully.
DJ68-00186H 0.0 3/20/03 5:22 PM Page 2 IMPORTANT SAFEGUARDS This appliance must be connected to the same main voltage as shown on the rating plate. This vacuum cleaner is not suitable for removing any kind of liquid. Carpets treated with a liquid cleaner must be allowed to dry before being cleaned with the unit.
DJ68-00186H 0.0 3/20/03 5:22 PM Page 4 POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) REWINDING When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe.
Page 5
DJ68-00186H 0.0 3/20/03 5:22 PM Page 5 DUST-FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. If the “Dust-Full” indicator continues to display “RED” even after NOTE : changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.
Page 6
DJ68-00186H 0.0 3/20/03 5:22 PM Page 6 CYCLONIC FILTER (ONLY CYCLONIC FILTER TYPES) You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it maintain the maximum cleaning efficiency. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter.
Page 7
DJ68-00186H 0.0 3/20/03 5:22 PM Page 7 3) After removing the used dust 4) Press the dust cover down bag, insert the cardboard bag gently until the clamper relocks. collar of the new dust bag into the carrying bag. NOTE : Used dust bag can be sealed by removing the film from the paper and sticking...
DJ68-00186H 0.0 3/20/03 5:22 PM Page 8 USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator when cleaning carpets..