Table of Contents
Advertisement
Format 16:9 (WIDE SCREEN)
OPTIONS
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿¤¤
œ ❷¤¤
OK
END:
MENU
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
GB
FORMAT 16:9
:AUTO
NICAM
:ON
IPC
:ON
❿
œ ❷
END:
MENU
Selecting the Colour Mode
OPTIONS
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿¤¤
OK
END:
MENU
œ ❷¤¤
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
FORMAT 16:9
:AUTO
NICAM
:ON
IPC
:ON
❿
œ ❷
END:
MENU
32
Your VCR can automatically read a 16:9 signal from the AV2 input
or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through
a 21 pin scart cable.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
œ
,
❷¤
USER SET
option.
3
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the
œ
❷
FORMAT 16:9
option is selected.
Press the ❿ button to select
5
AUTO
ON
OFF
AUTO Set when you use a wide TV. The VCR detects wide TV
programmes and normal TV programmes automatically
when playing back and recording.
ON
The VCR always plays back and records in the mode
compatible with 16:9 wide screen. Set if the VCR cannot
detect wide TV programmes with "AUTO" set.
OFF
Set if you do not use a wide TV.
6
On completion, press MENU twice to exit the menu.
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
When playing back a cassette, the standard is
automatically selected by the VCR.
When you playback an NTSC-recorded tape on this VCR
make a setting on the colour system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
,
œ
❷¤
USER SET
option.
3
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the
œ
❷
COLOUR SYSTEM
option is selected.
Press the ❿ button to select
5
AUTO
PAL
MESECAM
NT4.43
NTPB
B/W
.
AUTO When playing back a cassette, the system standard is
automatically selected by the VCR.
B/W
Black and White
6
On completion, press MENU twice to exit the menu.
Selecting the Audio Output Mode (SV-L620K Only)
When monitoring a TV programme or playing back a Hi-Fi
recorded video tape, press the AUDIO button to select a desired
sound output. As the AUDIO button is pressed, the sound output
and the indicator change as below:
Sound type
OSD display
Heard in stereo.
(left channel and
L R
right channel)
.
Left channel heard
from both the left
L
and right
speakers.
Right channel
heard from both
the left and right
R
speakers.
Sound mixed the left and right channels, and the
MIX
normal audio track.
Heard in
monaural.
MONO
Selecting the Audio Mute Mode (SV-L80K/SV-L30K Only)
You can select the mode in which the sound is mute.
To select the audio mute mode on and off, simply press the AUDIO button
on the remote control.
SECAM
Standard
sound
Stereo sound
Bilingual sound
broadcast
Channel I (MAIN)
heard from the left
Heard in
speaker, channel
monaural.
II (SUB) heard
from the right
speaker.
Channel I (MAIN)
heard from both
Heard in
the left and the
monaural.
right speakers.
Channel II-(SUB)
heard from both
Heard in
the left and the
monaural.
right speakers.
Channel I (MAIN)
Heard in
heard from both
monaural.
the left and the
right speakers.
REPEAT
AUDIO
DISP./
VOL
PROG/TRK
REC
MENU
GB
(SV-L80K)
(SV-L30K)
AUDIO
AUDIO
VOL
P
TRK
REC
REC
X
33
Advertisement
Table of Contents
