Recording A Programme With Automatic Stop; Using The Timer Programming Feature - Samsung SV-254G Instruction Manual

Recording a Programme with Automatic Stop

GB
This function enables you to record up to nine hours of
programmes. (LP)
Your VCR stops automatically after the requested length of time.
1
2
3
3
(SV-650GS/SV-455G/
(SV-254G/SV-254GS)
(SV-455GS)
4
CT
IPC INPUT
VCR INPUT
4
4
REPEAT
REPEAT
DISPLA
DISP./
RK PROG
OL PROG/TRK
4
5
4
REC MENU
6
6
OK
7
5
SPEED DUB TV/VCR TIMER
8
LENGTH 2:30
SET LENGTH :
PRESS REC
24
Switch on the television.
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used)
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The VCR is switched on automatically.
Select:
The station to be recorded using the PROG/TRK (# or ❷) /
PROG (# or ❷) buttons
or
The LINE IN 1 or LINE IN 2 source using the INPUT button
for a satellite tuner or external video source
Result: The channel number is displayed and the programme
can be seen on the television.
Select the recording speed (SP/LP) by pressing the SPEED button
as many times as required (see page 22).
Hold the REC button down for a while to start recording.
Result: The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 33).
Press the REC button several times to increase the recording time
in:
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
If you wish to cancel the recording before the end, press
VCR STANDBY/ON (STANDBY/ON).
If the end of the tape is reached while recording:
The recording stops
The VCR automatically turns off

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the VCR to
record a programme up to one month before that programme is to
be broadcast. Up to six programmes can be preset.
Before presetting a recording, check that the date and
time are correct.
1
- Insert the cassette. Press the TIMER button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select TIMER PROGRAMMING
Result: The TIMER PROGRAMMING menu is displayed.
2 Press ❿ to select the input source.
3 Select the required station by pressing the , buttons or
# ❷
INPUT to select the LINE IN 1 or LINE IN 2 input sources.
4 Press ❿ to select the recording day.
5
Select the required day by pressing the or buttons.
# ❷
6 Press ❿ to select the recording start time.
7
Select the required hour value by pressing the or
# ❷
8 Press ❿ to select the minutes.
9
Select the required minute value by pressing the or
#
10 Press ❿ to select the recording end time.
11 Select the required recording end time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12 Press ❿ to select the the recording speed (AUTO/SP/LP).
13
Press the or buttons to switch between the AUTO
# ❷
(Standard Play) or LP (Long Play).
14 When you have finished, press the MENU button.
15 Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
Result: Before starting recording, the VCR compares the timer
duration with the remaining time on the cassette.
Auto Tape Speed Select
The VCR's "Auto Tape Speed Select" function compares
the duration of the timer recording to the actual recording
time remaining on the tape loaded. If there is insufficient
tape to complete a timer recording in AUTO mode, the
VCR automatically switches to LP mode to record the
whole programme.
E.g. If there is a one hour AUTO mode timer recording
to be started, but only 40 minutes of tape
remaining, the VCR will record in SP for 20
minutes and switch to LP mode for the remaining
40 minutes.
SPEED DUB TV/VCR TIMER
1
option.
PROG PROG OPTIONS INSTALL
CLOCK BONUS LANG
TIMER PROGRAMMING
➛❿!! OK END: MENU
# ❷!!
buttons.
buttons.
❷
1/JAN MON 21:28
PROG
PR DAY START STOP
L1 MO 1 12:00 12:50SP
-- ---- --:-- --:----
-- ---- --:-- --:----
or
# ❷
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
➛❿
# ❷
DELETE:CLR/RST MENU
, SP
(SV-650GS/SV-455G/
(SV-254G/SV-254GS)
(SV-455GS)
STANDBY/ON
VCR STANDBY/ON
SLO
SLO
15
15
SHUT
SHUT
V-LO
V-LO
25
GB