Selecting The Cassette Type; Selecting The Recording Speed; Nicam (Sv-656I Only) - Samsung SV-252I Instruction Manual

Selecting the Cassette Type

GB
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
PROG OPTIONS OPTIONS INSTALL
2
CLOCK BONUS LANG
USER SET
3
4
➛❿!! OK END: MENU
$ ❷!!
5
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
IPC :ON
6
❿ END: MENU
$ ❷

Selecting the Recording Speed

You can record a cassette at two different speeds:
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
In Long Play modes:
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
To record a cassette...
In standard play mode
In long play mode
SPEED DUB TV/VCR TIMER
22
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the corresponding , or ➛, ❿ buttons to select the
$ ❷!
USER SET option.
Press the OK button to select this option.
Press the corresponding or buttons, until the TAPE
$ ❷
SELECT option is selected.
Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
Press MENU twice to exit the menu.
SP (Standard Play)
LP (Long Play)
Each cassette lasts twice as long
Press the SPEED button on the
remote control, until...
SP is displayed.
LP is displayed.

NICAM (SV-656I Only)

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 31.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or ➛, ❿ buttons to select the
$ ❷!
option.
USER SET
3 Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or buttons, until the NICAM
$ ❷
is selected.
5 To... Press ➛ or ❿, until...
Mono mode OFF is displayed.
: Only set at this position to record the
OFF
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode ON is displayed.
ON : Normally set at this position.
6
On completion, press MENU twice to exit the menu.
GB
OPTIONS
PROG OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
➛❿!! OK END: MENU
$ ❷!!
OPTIONS
option OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
❿
END: MENU
$ ❷
23