Description: Contains the necessary hardware to mount the turbine inlet to the exhaust manifold. The hardware is constructed of
high-quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
• Kit Contents:
Qty.
Description
K 4
Stud, 8mm x 1.25 x 1.45" long
K 4
Nut, 8mm x 1.25
K 4
Washer, 8mm
• INSTALLATION:
1. Hand tighten the 1.45"
manifold, with the shorter threads towards the manifold
(See Fig. 1).
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
Catalog #15012
Rev. 5/05 - RS/mc
Description: Contains the necessary hardware to mount the turbine inlet to the exhaust manifold. The hardware is constructed of
high-quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
• Kit Contents:
Qty.
Description
K 4
Stud, 8mm x 1.25 x 1.45" long
K 4
Nut, 8mm x 1.25
K 4
Washer, 8mm
• INSTALLATION:
1. Hand tighten the 1.45"
manifold, with the shorter threads towards the manifold
(See Fig. 1).
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
Catalog #15012
Rev. 5/05 - RS/mc
long studs into the exhaust
long studs into the exhaust
TURBOCHARGER TURBINE INLET STUD KIT
For Exhaust Manifold To Turbine Inlet
INSTALLATION INSTRUCTIONS
1.45"
Towards Exhaust
Manifold
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
E-Mail: Edelbrock@Edelbrock.com
TURBOCHARGER TURBINE INLET STUD KIT
For Exhaust Manifold To Turbine Inlet
INSTALLATION INSTRUCTIONS
1.45"
Towards Exhaust
Manifold
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
E-Mail: Edelbrock@Edelbrock.com
Catalog # 15012
Towards Turbine
Inlet
Fig. 1
©2005 Edelbrock Corporation
Brochure #63-0391
Catalog # 15012
Towards Turbine
Inlet
Fig. 1
©2005 Edelbrock Corporation
Brochure #63-0391
Need help?
Do you have a question about the Turbocharger 15012 and is the answer not in the manual?
Questions and answers