Advertisement
Quick Links
1. Clean all gasket mating surfaces. Stuff paper towels into the open intake ports before cleaning to prevent any debris
from entering the engine.
2. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below (See Fig. 1).
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com
Catalog #15041 & #15042
Rev. 4/05 - RS/mc
1. Clean all gasket mating surfaces. Stuff paper towels into the open intake ports before cleaning to prevent any debris
from entering the engine.
2. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below (See Fig. 1).
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com
Catalog #15041 & #15042
Rev. 4/05 - RS/mc
Torque all bolts to 17 ft./lbs
Torque all bolts to 17 ft./lbs
INTAKE MANIFOLD GASKET
For Honda B16 and B18C1 Engines
Catalog #15041 & #15042
INSTALLATION INSTRUCTIONS
Fig. 1
©2005 Edelbrock Corporation
INTAKE MANIFOLD GASKET
For Honda B16 and B18C1 Engines
Catalog #15041 & #15042
INSTALLATION INSTRUCTIONS
Fig. 1
©2005 Edelbrock Corporation
Brochure #63-0382
Brochure #63-0382
Advertisement
