Switching On and Off
The mains lead is attached to the rear of your set.
1
2
3
Placing in Standby Mode
Your set can be placed in Standby mode in order to reduce the
power consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
2
Plug the mains lead into an appropriate socket.
Result:
When the power cord is plugged in, the LED turns red.
Press the
POWER button to switch on.
To switch off, press the
Press the
POWER button.
To switch back on, simply press the
numeric button, or channel
Do not leave your set in Standby mode for long periods of time.
(when you are away on holiday, for example)
Turn off by pressing the
It is best to unplug the set from the mains and aerial.
POWER button again.
POWER button again, a
or
button.
POWER button.