Setting The Blue Screen Mode; Selecting The Source; Editing The Input Source Names - Samsung LE15S51BP Owner's Instructions Manual

Setting the Blue Screen Mode

If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the "Blue Screen"
mode to "Off".
1.
2.
3.
4.

Selecting the Source

You can select among external sources connected to
your TV's input jacks.
1.
2.
3.

Editing the Input Source Names

Name the device connected to the input jacks to make your input
source selection easier.
1.
2.
3.
4.
5.
Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER
Press the or button to select "Blue Screen"
then press the ENTER
Press the or button to select "On" or "Off".
Press the ENTER button.
Press the EXIT button to exit.
Press the MENU button to display the menu.
Press the ENTER
Press the ENTER
Select the required device by pressing the
Press the ENTER
Press the SOURCE button on the remote control to toggel between all the available
source. TV mode can be selected by pressing the TV or P
remote control but you cannot select it by pressing the SOURCE button.
Press the MENU button to display the menu.
Press the ENTER
Press the or button to select "Edit Name", then press the
ENTER button.
Press the or button to input select input source that you wish to edit.
Press the ENTER
Press the or button to select the required device.
Press the ENTER
Press the EXIT button to exit.
English-15
button.
button.
button to select "Input".
button to select "Source List".
button.
button, to select "Input".
button.
button.
or button to
or button.
/ button on the