Samsung UW-17J11VD Owner's Instructions Manual page 50

C18A_ENG_europe_17"_film
ENG
PR.
Start
Stop
Date
Mode
Decoder
Speed
PDC
Select Adjust
PR.
Start
Stop
Date
Mode
Decoder
Speed
PDC
Select Adjust
PR.
Start
Stop
Date
Mode
Decoder
Speed
PDC
Select Adjust
PR.
Start
Stop
Date
Mode
Decoder
Speed
PDC
Select Adjust
PR.
Start
Stop
Date
Mode
Decoder
Speed
PDC
Select Adjust
10/10/03 4:11 PM
Using the
VCR Menu
P 1
22 : 00
23 : 00
30 / 04 / 2003
Once
Off
SP
Off
Exit
VCR Menu
P 1
22 : 00
23 : 00
30 / 04 / 2003
Once
Off
SP
Off
Exit
VCR Menu
P 1
22 : 00
23 : 00
30 / 04 / 2003
Once
Off
SP
Off
Exit
VCR Menu
P 1
22 : 00
23 : 00
30 / 04 / 2003
Once
Off
SP
Off
Exit
VCR Menu
P 1
22 : 00
23 : 00
30 / 04 / 2003
Once
Off
SP
Off
Exit
50
Page 50
Feature
TM
(UK Only) (continued)
7 Press the † or ... button to select Date. Modify the date on which
the recording is to take place.
Press the † or ... button to select Mode. Select the required option
8
(Once, Daily, or Weekly) by pressing the œ or √ button.
Once : Select to record a programme once.
Daily : Select to record a programme every day
(Monday...Friday) at the same time.
Weekly : Select to record a programme every week on the
same day at the same time.
Press the † or ... button to select Decoder. Indicate whether you
9
wish to use a decoder On or not Off by pressing the œ or √
button.
If you have no scramble decoder, please do not set decoder
On and the set will be recorded through "AV INPUT".
10 Press the † or ... button to select Speed. Select the required
option (SP or LP) by pressing the œ or √ button.
Press the † or ... button to select PDC (or VPS). Indicate whether
11
you wish to use a PDC On or not Off by pressing the œ or √
button.
VPS is available in only German, Switzerland, and Austria.
12 When you are satisfied with all your settings, press the MENU
button to return to normal viewing.
13
Press the POWER ( ) button to activate the timer.
Result: The Timer indicator on the front panel lights up.
If no cassette has been inserted when you press the
POWER ( ) button, the Timer indicator flashes. If the
safety tab on the cassette has been broken, the Timer
indicator flashes. Insert the appropriate cassette. If there is
a power failure or you disconnect the television from the
wall socket, all your settings are lost.
14
Refer to page 51 if you wish to check that your VCR unit has been
programmed correctly and cancel a preset recording.
TM
is a trademark applied for by Gemstar
Development Corp.
under licence from Gemstar Development Corporation.
TM
system is manufactured