C18A_ENG_europe_17"_film
ENG
10/10/03
4:11 PM
Using the Crystal PlayBack
You can compensate a poor rental tape.
Adjusting the Picture Quality during Playback
This set has an inbuilt tape alignment system (A.TRK) that selects
the optimum position for the tape automatically. If, however, noise
bars (streaks) appear at the top or bottom of the picture during
playback (particularly in slow motion), you can adjust the
alignment of the image to obtain the best possible picture.
Picture stability can be adjusted more easily in the Pause and Slow
Motion modes.
42
Page 42
1
Insert the cassette in the compartment, press the PLAY/PAUSE
(
) button.
2
Press the CRYSTAL PB button on the remote control.
Result:
The CRYSTAL PB option is displayed with Off
When Picture is set to Auto on VCR menu, initial setting
CRYSTAL PB is ON.
3
To activate (to On) the feature, press the CRYSTAL PB button
again.
This feature activates only when a tape is being
played.
If the tape is reinserted, the CRYSTAL PB becames
Off.
To adjust alignment, press the TRK
clear and stable.
Even if you cannot remove all noise bars, choose the
setting that gives the clearest picture.
or
button until the picture is