Table of Contents
Advertisement
C18A_ENG_europe_17"_film
Using the Tape Counter to Search for a Sequence
The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR unit
Enables you to find the beginning of a sequence easily
1
Insert a cassette in your VCR unit.
2
Press INFO twice.
Result:
The tape counter is displayed:
00:00:00.
The tape counter does not necessarily start from zero at the
beginning of the tape.
3
Select the required operation (play, record, fast-forward, rewind).
Result:
The tape counter indicates how long the cassette has
been running.
4
To set the tape counter to zero at the beginning of a sequence:
Pess CLEAR ( X ) when you want to set the tape counter to
zero.
5
To set the tape counter to start at the beginning of a sequence:
With the counter display on the screen, press ENTER (
activate the memory ( ).
6
To fast-forward or rewind to the sequence at which the counter
was set to zero, simply:
Press FF (
Result: With the memory ( ) the tape will stop automatically
during FF or rewind when the count reaches the
00:00:00 position.
Press PLAY (
10/10/03
4:11 PM
Page 41
) or REW (
).
) to play at the count 00:00:00 position.
) to
ENG
00:00:00
SP
00:00:00
SP
41
Hide quick links:
Advertisement
Table of Contents
