Memorizing The Channels; Selecting The Video Signal-Source - Samsung CT-21T20MQ Owner's Instructions Manual

AA68-03465A-00Eng_XTC

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are memorized, use the CH
CH
nels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
Note: STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed
to "Storing Channels in Memory" (next page).
22
5/7/04 1:31 PM Page 22
O
P E R AT I O N
buttons to scan through the channels. This eliminates the need to change chan-
1
Press the MENU button to
display the menu.
Press the L or M button to
select "Channel" , then press
the ENTER button
Move
2
Press the L or M button
to select "Air/CATV" , then
press the ENTER button
Move
3
Repeatedly press the
œ œ or √ √ button to cycle
through these choices:
"Air" (antenna) "STD" ,
"HRC" or "IRC" (all cable
TV)
Move
Press the EXIT button to
exit.
Channel
√ √
Auto Program
√ √
Add/Delete : Deleted
Air/CATV : Air
Name : ----
Enter Return
Channel
√ √
Auto Program
√ √
Add/Delete : Deleted
Air/CATV : Air
Name : ----
Adjust Return
Channel
√ √
Auto Program
√ √
Add/Delete : Deleted
Air/CATV : STD
Name : ----
Adjust Return
and