I
N S TA L L AT I O N
Connecting a VCR
These
instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 9-12). Skip step
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
4
Connect an audio cable
between the AUDIO OUT
jack on the VCR and the
AUDIO jack on the TV.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
Follow the
instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
VCR Rear Panel
Incoming
Cable or
Antenna
VCR Rear Panel
VCR Rear Panel
VCR Rear Panel
1 if you have not yet
TV Rear Panel
Coaxial Cable
TV Rear Panel
Audio Cable
TV Rear Panel
Video Cable
13