Table of Contents
Advertisement
Operation
Setting Cooking Times & Power Levels
Your microwave allows you to set up to two different stages of cooking,
each with its own time length and power level. The power level lets you
control the heating intensity from Warm (1) to High (0).
One-stage Cooking
For simple one-stage cooking, you only need to set a cooking time. The
power level is automatically set at High. If you want to set the power to
any other level, you must set it using the Power Level button.
1
Use the number buttons to set a cooking time. You can set a time
from one second to 99 minutes, 99 seconds. To set a time over
one minute, enter the seconds too. For example, to set 20
minutes, enter 2, 0, 0, 0 .
2
If you want to set the power level to something other than High,
press the Power Level button, then use the number buttons to
enter a power level.
Power Levels:
1 = warm
2 = low
3 = defrost
4 = medium low
5 = medium
3
Press the Start/Time plus button to begin cooking. If you want to
change the power level, press Pause/Cancel before you press
Start/Time Plus, and re-enter all of the instructions.
Result: Cooking starts and once finished.
1) Oven emits four beeps.
2) Sign of finishing process sounds 3 time.(One time in every minute)
Some recipes require different stages of cooking at different
temperatures. You can set multiple stages of cooking with your
microwave.
6 = simmer
7 = medium high
8 = reheat
9 = sauté
0 = high
Multi-stage Cooking
1
Follow steps 1 and 2 in the "One-Stage Cooking" section on this
page.
When entering more than one cooking stage, the Power Level
button must be pressed before the second cooking stage can be
entered.
To set the power level at High for a stage of cooking, press the
Power Level button twice.
2
Use the number buttons to set a second cooking time.
3
Press the Power Level button, then use the number buttons to
set the power level of the second stage of cooking.
4
Press Start/Time Plus to begin cooking.
You can check the Power Level while cooking is in progress by
pressing the Power Level button.
Using the More/Less Button
The More/Less button allows you to adjust pre-set cooking times. It only
works with Auto Reheat, Instant Cook and Time Cook mode. Use the
More/Less button only after you have already begun cooking with one
of these procedures.
The More/Less key cannot be used with the Baby food key.
1
To ADD more time to an automatic cooking procedure: Press the
More(9) button.
2
To REDUCE the time of an automatic cooking procedure: Press
the Less(1) button.
If you wish to increase/decrease in Time Cook mode by 10
seconds, press the More(9) or Less(1) button.
12
Advertisement
Table of Contents
