Advertisement
Motor will not fire with a few kicks, open idle
cable
turn and repeat starting process.
NOTE: If flooding occurs, slowly open
throttle to wide open and hold. With
throttle still open, hold decompression
lever and kick motor through 5-10 times.
Release throttle and decompression lever
and proceed with normal starting
procedure.
For any questions regarding tuning or
installation of Edelbrock products, please
call our toll free tech line M-F 8:00am-12:
30pm, 1:30pm-5:00pm PST.
877-888-7504 ext.2.
Edelbrock #3112 XR400 Carburetor
Specifications
Bore Size: 38mm Tall X 32mm Wide
Needle: 15E @ 12 Clicks
Accelerator Pump Bypass: 2.75 turn out
Alternate Needles: 13E, 17E
Replacement Cables: #9331
Edelbrock #3113 XR600 Carburetor
Specifications
Bore Size: 40mm Tall X 34mm Wide
Needle: 17E @ 15 Clicks
Accelerator Pump Bypass: 2 turn out
Alternate Needles: 15E, 19E
Replacement Cables: #9332
Advertisement
