Using The Bookmark Function; Using The Zoom & 3D Sound Functions - Samsung DVD-S128 Manual

00049E S128/XST Eng3 11/21/02 3:47 PM

Using the Bookmark Function

The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
Using the Bookmark Function (DVD/VCD)
1
1
During play, press the BOOKMARK button on
the remote. The Bookmark icons will be
displayed.
2
2
Use the LEFT/RIGHT buttons to move to the
desired bookmark icon.
3
3
When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
4
4
Press the BOOKMARK button to turn off the
display.
Recalling a Marked Scene
1
1
During play, press the BOOKMARK button on
the remote.
2
2 Use the LEFT/RIGHT buttons to select a
marked scene.
3
3 Press the PLAY/PAUSE button to skip to the
marked scene.
Clearing a Bookmark
1
1
During play, press the BOOKMARK button
on the remote.
2
2
Use the LEFT/RIGHT buttons to select the
bookmark number you want to delete.
3
3
Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn
off display.
36
Page 36
NOTE
• Up to three scenes may be marked at
a time.
• When in VCD 2.0 mode (MENU ON
mode), this function does not work.
• Depending on the disc, the Bookmark
function may not work.
ENG
Using the Zoom & 3D Sound Functions
Using the Zoom Function (DVD/VCD)
1
1
During play or pause mode, press the ZOOM
button on the remote. A square will be
displayed on screen.
2
2
Use the UP/DOWN or LEFT/RIGHT
button to select the part of the screen you
want to zoom in on.
3
3
Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
- During VCD play, press ENTER to zoom in
2X/normal in order.
Using the 3D Sound Function
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect. This feature is
useful when you are using the DVD player with a
two channel stereo through the analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT or MPEG-2
is set to BITSTREAM in the SETUP MENU, the 3D
Sound function will not work.)
1
1 During play, press the 3D button. The 3D
SOUND mark will be displayed on screen.
(Be sure the DIGITAL OUTPUT is set to PCM.)
2
2
Press the UP/DOWN buttons to turn the 3D
Sound feature on or off.
ENG
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL. However, some of
these discs do not contain rear channel
sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
37