Using The Disc View Function; Slow Repeat Play - Samsung DVD-S128 Manual

00049E S128/XST Eng3 11/21/02 3:46 PM

Using the Disc View Function

Track View (VCD)
Displays the beginning view of each track and the
track number.
1
1
During play, press the TOP MENU button.
2
2
Press the UP/DOWN buttons to select TRACK
VIEW. Press the ENTER button.
3
3
Select the desired view by pressing the
UP/DOWN or LEFT/RIGHT buttons.
- Press the SKIP button for the next 9 tracks if the
movie has more than 9.
4
4
Press the ENTER button.
Index View (VCD)
Displays the equally divided 9 views of the current
playing track.
1
1
During play, press the TOP MENU button.
2
2
Press UP/DOWN buttons to select INDEX
VIEW. Press the ENTER button.
3
3
Select the desired view by pressing
UP/DOWN or LEFT/RIGHT buttons.
4
4
Press the ENTER button.
NOTE
When pressing the TOP MENU button with a DVD;
•
have at least two titles for the TITLE MENU function to work.
When pressing the TOP MENU button with a CD;
•
to the beginning of each track for about 10 seconds.
• You can also operate it using the DIGEST button.
30
Page 30
the disc's TITLE MENU function comes up. A disc must
the unit enters the INTRO mode. INTRO lets you listen
ENG
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
When playing a DVD
1
1
Press the PLAY/PAUSE button.
2
2
Press and hold the SKIP button to choose the play speed between 1/8X, 1/4X, and
1/2X of normal. (DVD-S428K only)
Press the FORWARD SEARCH button to choose the play speed between 1/8X, 1/4X,
and 1/2X of normal. (DVD-S128/DVD-S228/DVD-S328K only)
3
3
Press the "REPEAT A-B" of the remote control once at the first section to repeat
while the multiple-speed is selected (A-point selection).
4
4
Press the "REPEAT A-B" button again (B-point selection).
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT (A-B)' button again.
Then press play to resume normal playback.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
ENG

Slow Repeat play

31