Tour Of The Remote Control; Choosing A Connection - Samsung DVD-HD850 Manual

DVDHD850 XSS-00_Eng1 13/01/2005 8:21 Page 10
S
E T U P

Tour of the Remote Control

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1. DVD POWER Button
Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
Allows you to program a specific order.
4. STEP Button
Advances play one frame at a time.
5. VOL (+, -) Buttons
Control volume.
6. TV/VIDEO Button
Press to display all of the available video sources
( i.e., TV, Cable, Video)
17
7. SEARCH Buttons ( / )
Allow you to search forward/backward through a disc.
8. STOP Button ( )
9. SKIP Buttons ( / )
Use to skip the title, chapter or track.
10. MENU Button
Brings up the DVD player's menu.
18
11. RETURN Button
Returns to a previous menu.
19
12. AUDIO Button
20
Use this button to access various audio functions on a disc.
21
13. ZOOM Button
Enlarges DVD picture.
22
14. VIDEO SEL. Button
Selects Video output format.
15. REPEAT A-B Button
Allows you to repeat play A-B disc.
23
16. BOOKMARK Button
17. TV POWER Button
Turns the TV's power on or off.
24
18. CLEAR Button
Use to remove menus or status displays from the screen.
25
19. INSTANT SKIP Button
This function skips playback ahead 10 seconds.
20. INSTANT REPLAY Button
26
This function is used to replay the previous 10 seconds
of a movie from the current position.
21. CH ( , ) Buttons
27
Channel selection.
22. OPEN/CLOSE ( ) Button
28
To open and close the disc tray.
23. PLAY/PAUSE Button ( )
29
Begin/Pause disc play.
24. INFO Button
30
Displays the current disc mode.
31
25. DISC MENU Button
Brings up the Disc menu.
26. ENTER/" " ❷ ❷ ➛ ➛ ❿ ❿ Buttons
32
This button functions as a toggle switch.
27. ANGLE Button
33 Use to access various camera angles on a DVD.
28. EZ VIEW Button
The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).
29. HDMI SEL. Button
HDMI or DVI Output resolution setup.
30. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
31. SUBTITLE Button
32. SHUTTLE DIAL (Search mode)
Performs fast motion play.
33. JOG DIAL (Step mode)
Operates frame by frame play. In CD mode,
performs track search.
ENG-10
C h a p t e r 2
C
O N N E C T I O N S

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user's manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO
(red and white) OUT terminals on the rear of the DVD player to
the VIDEO (yellow)/AUDIO (red and white) IN terminals of
your TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (S-Video
- When the Video Output in Setup menu is set to Component(P-SCAN) & HDMI, the Video and S-Video
Outputs do not work.
ENG-11
I-SCAN P-SCAN & HDMI)