Samsung DVD-VR320 Instruction Manual page 87

Troubleshooting
(DVD-VIDEO/DVD-RAM/-RW/-R)
If your product malfunctions, go through the check points below before contacting a Samsung authorized
service center.
Problem
No power.
The input is displayed
for a while when the
power turns on.
Cannot record TV
programmes.
Timer recording does
not work properly.
Cannot record.
I pressed the REC
button but there is
no response.
I forget the password
for parental lock.
Cannot play the disc.
No sound.
Explanation/Solution
• Check whether the power cord is securely plugged into the power outlet.
• Did you press the /I STANDBY/ON button of your DVD Recorder & VCR.
The DVD Recorder & VCR requires some time to initialize after it is turned on.
• Check whether the power cord is securely plugged into the power outlet.
• Did you set the DVD Recorder & VCR programme settings correctly?
• Check the free space on your DVD-RAM/-RW/-R disc.
• Check the antenna cable is connected.
• Check the recording time, end time and current time settings again.
• Recording will be cancelled if the power is interrupted due to a power
failure or other reason during recording.
• Check whether the disc is formatted. This product can record on
formatted discs only.
• Check whether your DVD-RAM/-RW/-R disc has a sufficient free space.
Recording is available on DVD-RAM/-RW/-R discs only.
If a programme is copy protected, you cannot record it.
Press and hold √√ I button of your DVD Recorder & VCR when the power is on.
All settings including password will revert to factory settings.
Do not use it if not absolutely required.
(Note that this function is available only when there is no disc inserted.)
• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc.
• Are you watching a programme in slow or skip mode?
If you are playing a programme at a speed other than normal speed, sound
is not output.
• Check the connections and initial settings.
• Check whether the disc is damaged.
Clean up the disc, if necessary.
• Check whether the disc is inserted correctly with the label facing up.
English - 87