Selecting the Automatic Operating Mode
You can start the air conditioner in Automatic mode from your remote
control. In the Automatic mode, the standard temperature and the opti-
mum fan speed is selected automatically. You can adjust the standard
temperature but not the fan speed.
1
If necessary, press the
◆
The air conditioner starts up in Cool mode with
Result:
Turbo fan speed.
◆ The operation indicator on the indoor unit lights up.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
◆ The indoor unit beeps each time you press the
Result:
◆ The air conditioner runs in AUTO mode.
N N
o o
t t
e e
You can change modes at any time.
N N
o o
t t
e e
3
To adjust the standard temperature (The air conditioner automatically
set the standard temperature by the current room temperature.),
press the
button one or more times.
SET TEMP. SET TEMP.
-2°C
-1°C
< When you feel hot >
(On/Off) button.
-
SET TEMP. SET TEMP.
Standard temperature
< When you feel chilly >
button.
+1°C
+2°C
9
E-