Selecting Connected Devices; Connect Your Computer; To Select Connected Devices - Philips FTR9965/17SB Manual

Headphone
L
Camera & camcorder
1 2 3

Connect your computer

See the separate supplied instruction manual with your monitor.

To select connected devices

B
CBL VCR DVD SAT AMP
v
l ®
v
Select
Ò ‡ π †
l
x
CC
®
OK
® ®
&
Insert the plug into the headphone socket L behind the door at
the front side of the receiver. Press the center of the door to
open.
é
Press ¬ on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 2000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND
headphone volume.
Note: When a TV channel or external source is blocked via the Channel
Lock menu (see p. 12), also the headphone is muted.
When Dual Screen/PIP is activated (see p. 15):
- if the main screen displays a TV channel picture, you hear the sound
from the Dual Screen/PIP picture through your headphone.
&
Connect your camera or camcorder to the front input behind the
door at the front side of your receiver. Press the center of the
door to open.
é
Connect the equipment to
mono equipment.
"
For stereo equipment also connect
S-VHS quality with an S-VHS, Hi-8 or Digital camcorder is
obtained by connecting the S-VHS cables with the
(instead of
Devices connected to the rear or on the front side of the receiver box
&
v
Press the button to select
according to where you connected your devices at the rear or on
channels
the front side of your receiver.
é
Press the cursor up/down.
"
Press OK.
Remark : most equipment (decoder, video recorder) carries out the switching itself. This is
however never the case with a computer connected to the VGA input.
If you want to change to TV channels?
Enter the channel number of the TV channel which you want to watch with the
digit buttons.
menu select
Headphone volume
2 and
VIDEO IN
AUDIO R
2) and
VIDEO IN AUDIO
,
AV1 AV2, AV3, AV4, AV5
to adjust the
1 for
AUDIO L
1.
input 3
S-VHS
inputs 1.
, or
FRONT,VGA TV
19