Philips TSI6400 Manual page 22

Getting the iPronto Up and Running
Follow these steps to set your wireless network settings.
iPronto User Guide
22
1 Press and hold the scroll wheel for 5 seconds to display the System Settings.
2 Select the Wireless tab in the System Settings.
3 To change the default name of the Service Set Identifier, enter the new name in the Service Set
Identifier text box.
To obtain information on this, consult your WAP manual or the WAP configuration on your PC.
4 If encryption is enabled in your wireless network, select the correct encryption in the Wireless Network
Encryption section:
none;
64 bit;
128 bit.
To obtain information on this, consult your WAP manual or the WAP configuration on your PC.
5 If encryption is enabled in your wireless network, enter your Encryption pass phrase in the Encryption
pass phrase text box.
The Encryption key text box is automatically filled in.