Removing Aa Standard Batteries; Battery Pak Charging; Charger Choices; Installing A Charger To Your Phone - Motorola POPULOUS Getting Started Manual

Removing AA Standard Batteries

Remove the battery compartment
1.
door.
Grasp one AA standard battery and
2.
pull to remove from battery
compartment.
Remove the remaining three AA
3.
standard batteries from the battery
compartment.
4. Install the battery compartment
door.

Battery Pak Charging

Your Battery Pak needs no other maintenance
than routine charging. Please note that AA
standard batteries cannot be recharged by
your phone.

Charger Choices

Your phone may be packaged with one of three
chargers: an AC Standard Transformer Charger,
an AC Fast Transformer Charger or a Cigarette
Lighter Adapter. When your phone is powered
off, the following charging times are required:
Charging time required for
Charger
90% Battery Pak capacity
AC Standard
Transformer Charger
AC Fast Transformer Charger
Cigarette Lighter Adapter
Each of these chargers will also charge a
rechargeable Battery Pak when your phone is
12
4.5 hours
1.5 hours
1.5
hours
powered on. Operating the phone extends the
time required to recharge a Battery Pak.
Both the AC Fast Transformer Charger and the
Cigarette Lighter Adapter have been designed to
power your phone even when a Battery Pak or
AA standard batteries are not installed. Once
either of these chargers is properly installed,
simply press PWR to power on your telephone.
Please note that the AC Standard Transformer
Charger cannot be used to power your phone
when a Battery Pak or AA standard batteries are
not installed in your phone.
Installing a Charger to Your
Phone
1. Insert the jack plug on the charger
into the jack port located in the
+
lower left side of your phone.
2. Plug your charger into th,e
appropriate power source.
Your phone will emit a "beep" when a charger
has been properly installed.

Monitoring Charging Status

Once your charger is properly installed and
charging begins, the display of your phone will
help you monitor the charging status of your
Battery Pak. To help conserve power and more
rapidly charge your Battery Pak when your phone
is powered on, this status display will only
remain lit for seconds after charging begins.
16
13