Advanced Operations - Kenwood TK-5710(H Instruction Manual

Mid power vhf apco p25 transceiver/high power vhf apco p25 transceiver

Hide thumbs Also See for TK-5710(H:

Specifications (2 pages)

Service manual (125 pages)

Instruction manual (44 pages)

Table Of Contents

Table of Contents

Your transceiver operations vary according to the functions that your dealer has

programmed onto the transceiver keys. Following is brief overview of the

programmable functions. Refer to those functions which have been programmed

onto your transceiver.

•

2-tone

Press this key to display the list of 2-tone codes that has been pre-stored in

your transceiver memory. While viewing the 2-tone list, press the GRP

and

keys or rotate the CH control to select your desired code, then press

the PTT switch to make the call.

•

Autodial

Press this key to quickly call a DTMF number that has been pre-stored in your

transceiver memory. While viewing the Autodial list, press the GRP

keys or rotate the CH control to select your desired code, then press the

PTT switch to make the call. Refer to "A

•

AUX A

Press this key to activate the Auxiliary A port on the transceiver. When

activated, the

•

AUX B

Press this key to activate the Auxiliary B port on the transceiver. When

activated, the

•

AUX C

Press this key to activate the Auxiliary C port on the transceiver. When

activated, the

display.

•

Call Response

Press this key to respond to an Individual call.

•

Channel Down

Press this key to decrease the channel number. Press and hold this key to

cycle down through the channel numbers. If programmed by your dealer,

when the lowest channel number is reached, the transceiver will "roll-over" to

the highest channel number and continue cycling down.

•

Channel Recall

Press this key during Scan to return to the last called zone and channel.

•

Channel Select

Using the CH control, turn clockwise to increase the channel number and

counterclockwise to decrease the channel number.

•

Channel Up

Press this key to increase the channel number. Press and hold this key to

cycle up through the channel numbers. If programmed by your dealer, when

the highest channel number is reached, the transceiver will "roll-over" to the

lowest channel number and continue cycling up.