Table of Contents
Advertisement
7 Execution
7
Press the TIMER key on the re-
mote repeatedly until the pro-
gram number to be executed
("PROG. 1 " or "PROG. 2 " or
"PROG. 12 ") is lit.
T U N E R
EX. BASS
8
Press the POWER
switch the power off to the
STANDBY mode.
The STANDBY/TIMER indicator lights
in green.
The program timer is activated and re-
cording will start when the set ON time
comes.
To cancel program timer :
Press the TIMER key on the remote re-
peatedly until "PROG.1" or "PROG.2" or
"PROG.12" turns off.
To check or change the timer setting :
Restart the procedure from step 1 again.
Program No. lit
1
÷ Be sure to adjust the time of the day (page 7)
key to
÷ PROG.1 and PROG.2 should be set so that
÷ The speakers do not output audio during
÷ Even when the program timer is canceled,
÷ When the STANDBY/TIMER indicator is
before using the timer functions.
their operating periods do not overlap. Leave
at least 1 minute of interval between the two
programs.
timer recording.
previously made setting is stored in memory
and remains until new timer information is
set the next time.
blinking in green, the timer setting or clock
setting is erroneous. Check and correct them
as required (pages 7 & 58).
59
EN
Hide quick links:
Advertisement
Table of Contents
