Kenwood KRF-V6070D Instruction Manual page 16

Preparing for surround sound
2 Use the MULTI CONTROL knob or Multi %/fi keys to select the
speaker system setting.
1 2WAY 2SPKR : For selected Kenwood speaker – for example,
KS-307HT.
2 2WAY 3SPKR : For selected Kenwood speaker – for example,
KS-707HT.
3 OTHERS
: For general speakers.
• The selection of 2WAY 2SPKR or 2WAY 3SPKR should only be
used with 6 channels speaker system setting.
• When the setting 2WAY 2SPKR or 2WAY 3SPKR is selected, the
procedure skips to step 5.
3 For general speaker setting, use the MULTI CONTROL knob or
Multi %/fi keys to select OTHERS and press the SETUP key
again.
• The subwoofer setting indication "SUBW ON" appears.
4 Use the MULTI CONTROL knob or Multi %/fi keys to select
the appropriate subwoofer setting.
1 SUBW ON : Subwoofer setting mode to the receiver is ON.
2 SUBW OFF : Subwoofer setting mode to the receiver is OFF.
• The initial setting is "SUBW ON".
• When the setting "SUBW OFF" is selected, the front speakers
are automatically set to "FRNT LRG" and the procedure skips to
step 7.
Before step 7, press the SETUP key to accept the setting.
• When subwoofer output sound is required, select "FRNT NML".
5 Press the SETUP key to accept the setting.
• The front speakers setting indication "FRNT NML" appears.
6 Use the MULTI CONTROL knob or Multi %/fi keys to select
the appropriate front speakers setting.
1 FRNT NML (normal) : Average size front speakers are
2 FRNT LRG (large)
: Large front speakers are connected to
• For "FRNT LRG" selection, no sound will be heard from subwoofer
speaker even when it is set to ON. However, if you select "SW
RE-MIX ON" when subwoofer is selected, you will be able to
hear sound from the subwoofer.
When in STEREO mode, the sound goes directly to front speaker.
7 Press the SETUP key to accept the setting.
• The center speaker setting indication "CNTR NML" appears.
8 Use the MULTI CONTROL knob or Multi %/fi keys to select the
appropriate center speaker setting.
If you have selected "LRG" as the front speakers setting,
1 CNTR NML (normal) : An average size center speaker is
2 CNTR LRG (large)
: A large center speaker is connected to
3 CNTR OFF
: Center speaker setting mode to the
If you have selected "NML" as the front speakers setting,
1 CNTR ON
: Center speaker setting mode to the
2 CNTR OFF
: Center speaker setting mode to the
9 Press the SETUP key again to accept the setting.
•The surround speaker setting indication "SURR NML" appears.
16 EN
connected to the receiver.
the receiver.
connected to the receiver.
the receiver.
receiver is OFF.
receiver is ON.
receiver is OFF.
0 Use the MULTI CONTROL knob or Multi %/fi keys to select
the appropriate surround speaker setting.
If you have selected "LRG" as the center speaker setting,
1 SURR NML (normal) : Average size surround speakers are
connected to the receiver.
2 SURR LRG (large)
: Large surround speakers are connected
to the receiver.
3 SURR OFF
: Surround speaker setting mode to the
receiver is OFF.
If you have selected other than "LRG" as the center speaker
setting,
1 SURR ON : Surround speaker setting mode to the receiver is
ON.
2 SURR OFF : Surround speaker setting mode to the receiver is
OFF.
• When the setting "SURR OFF" is selected, the procedure skips
to step %.
! Press the SETUP key to accept the setting.
• The surround back speaker setting indication "SB" appears.
@ Use the MULTI CONTROL knob or Multi %/fi keys to select
the appropriate surround back speaker setting.
If you have selected "LARGE" as the surround speaker setting,
1 SB NORMAL : Average size surround back speaker is
connected to the receiver.
2 SB LARGE
: Large surround back speaker is connected to
the receiver.
3 SB OFF
: Surround back speaker setting mode to the
receiver is OFF.
If you have selected "NORMAL" as the surround speaker
setting,
1 SB ON
: Surround back speaker setting mode to the receiver
is ON.
2 SB OFF
: Surround back speaker setting mode to the receiver
is OFF.
# Press the SETUP key to accept the setting.
• The surround mix setting indication "SURR MIX" appears.
• SURR MIX is when the SL and SR speakers signals are mixed to
produce sound from the surround back speaker which would
enable the listener to enjoy sound coming from the back.
$ Use the MULTI CONTROL knob or Multi %/fi keys to select
the surround mix setting.
1 MIX OFF : Surround mix setting mode is OFF.
2 MIX ON
: Surround mix setting mode is ON.
% Press the SETUP key again to accept the setting.
• The subwoofer re-mix setting indication "SW RE-MIX" scrolls
across the display.
• If subwoofer is turned OFF, subwoofer re-mix setting is not
visible.
^ Use the MULTI CONTROL knob or Multi %/fi keys to
select the appropriate subwoofer re-mix setting.
1 RMX ON : Subwoofer re-mix set mode to the receiver is ON.
2 RMX OFF : Subwoofer re-mix set mode to the receiver is OFF.
& Press the SETUP key to accept the setting.
• The receiver enters the speaker volume level adjustment mode.
• In step 5 and 6, indications appear only for the selected channels
of the speakers that require adjusting.