Using The Cassette; Playing A Cassette Tape; Recording On A Cassette Tape - Kenwood HM-537WM Instruction Manual

Using the cassette

Playing a cassette tape

1 Press TAPE mode button (TAPE/MODE but-
ton on the remote control) to TAPE.
2 Press the area marked push open to open the
cassette compartment door.
3 Insert cassette tape into the compartment with
the open edge facing down.
4 Close the door securely.
5 Press TAPE mode button (TAPE/MODE but-
ton on the remote control) to select the de-
sired reverse mode.
icon : plays only one side of the tape
and stops.
icon : plays both side and stops.
icon : plays both side endlessly.
6 Press 4 or ¢ button to move tape to the
desired starting point.
7 Press 6 or
button to select the tape run-
ning direction and begin playing the tape.
8 Turn volume knob (press VOLUME UP or
DOWN button on the remote control) and press
EQ/X-bass button (EQ/X-BASS on the remote
control) to desired listening level.

Recording on a cassette tape

You can record from the radio or the CD player.
For best recording, use a normal bias tape (Type 1
only).
Recording from the radio
1 Insert a cassette tape into the tape compart-
ment and close door.
2 Press TUNER band/USB button (TUNER/
BAND/USB button on the remote control) to
TUNER and select a radio station.
3 Press rec button (REC button on the remote
control) to set the unit into recording standby
mode.
The icon "REC. " appears on the display.
4 Press 6 or
button to begin recording.
5 Press 7 stop button to end recording.
Radio recording tip
• To temporarily pause the recording, press rec
button (REC button on the remote control).
Press 6 or
button to resume recording.
Recording from a CD/MP3-CD/WMA-CD
1 Insert a blank cassette tape into the tape deck.
2 Press CD button to CD.
3 Insert a disc and make sure that the unit is in
stop mode.
4 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to select the first track/file you want to record.
5 Press rec button (REC button on the remote
control) to set the unit into recording standby
mode.
The icon "REC. " appears on the display.
6 Press 6 button or
cording.
Press rec button (REC button on the remote
control) to interrupt recording. Press 6 or
button to resume recording.
7 Press 7 stop button to end recording.
Notes:
• To ensure good system performance, wait until the
unit completely reads the disc before recording.
• During recording, it is not possible to listen to an-
other source.
button to begin re-
17
EN