Kenwood Media Application
Setup for audio data transfer
The operation for transfer of audio data from the PC to the Player can be set up with the following procedure.
1
Launch Kenwood Media Application.
2
Open [Tool] menu and click on [Option].
The [Option setting] dialog box opens.
3
Click on the [Transfer movement] tab to select it.
4
Click on [OK].
The [Option setting] dialog box closes and the transfer operation is set.
POINT:
¶ In case a transfer error occurs, the list of files that were not transferred is displayed after completion of the transfer
attempts, regardless of the setting in [When there is a file which can't be transferred].
The latest information can be found in the FAQ. Please consult the FAQ section on the KENWOOD website
of your resident country.
(if necessary you can find a link to your local website on www.kenwood.com
<http://www.kenwood.com>)
EN
Select the operation to be performed [When there
is a file of the same name] and that to be performed
[When there is a file which can't be transferred]
by clicking on the applicable radio buttons.
2
Additional Functions