Transferring The Sync Folder - Kenwood HD20GA7 Instruction Manual

Kenwood Media Application

Transferring the sync folder

1
Connect the PC to the player and launch Kenwood Media Application.
✍ [Connection of the PC and player] 5
✍ [Launching method] #
✍ [Setting the sync folder] §
2 Click on the Sync button in the transfer panel.
The same effect is also available by opening the [Tools] menu and clicking on [Synchronization].
Audio data is transferred while comparing the differences between the PC folder set as the sync folder in the PC and the
sync folder of the player.
POINT :
¶ An existing file that has previously been transferred to the player is overwritten if the date of the transfer source file is
later than the existing file.
¶ Even when files in the sync folder of the PC are deleted, the corresponding files in the sync folder of the player are not
deleted.
¶ The transferred data is all of the audio data located under the sync data.
EN
Setup/transfer of sync folder
Sync button Displays the progress of transfer
27
Application section