In Case Of Difficulty - Kenwood HD20GA7 Instruction Manual

Kenwood Media Application

In case of difficulty

Symptom
Player cannot be launched and
[NO SYSTEM FOUND ON HDD]
is displayed.
The built-in HDD of the player is
formatted. Is any setup required
after this?
How to restore the firmware:
1 Connection the PC and player.
✍ [Connection of the PC and player] 5
2 Launch the Explorer on the PC.
3 Open the folder in which [KWSYSTEM] is installed.
Select [Local Disk] \ [Program Files] \ [KENWOOD] \ [HD20GA7] and double-click on [BACKUP] to open the
folder in which the firmware is installed.
4 Copy the [KWSYSTEM] folder in the folder opened in step 3 to the player.
5 Disconnect the PC and player.
✍ [Disconnection of the PC and player] @
EN
Player cannot be launched because the firmware of the built-in HDD of the player is destroyed.
Restore the firmware as described in [How to restore the firmware] below.
The firmware should be restored in the built-in HDD of the player.
Restore the firmware as described in [How to restore the firmware] below.
32
Remedy
Knowledgesections