To Repeat Only The Programmed Tracks - Kenwood CD-403 Instruction Manual

To repeat only the programmed tracks

18
1
Press so that the "PGM" indicator
lights.
2
Select the disc.
3
Select the desired track number.
4
5
Repeat steps 2 – 4 above.
6
Press the REPEAT key.
For the CD-406/DPF-R6030
The current status is displayed when the key
is pressed once.
When it is pressed while the status is dis-
played, the repeat OFF status can be set to ON
(or vice versa).
7
Start playback.
To cancel repeated playback
CD-406/DPF-R6030
CD-404/403/DPF-R4030/R3030
P.MODE
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
Go to step 3 within 8 seconds.
Main unit Remote control unit
1 2
4 5
7 8
0 +10
Go to step 4 within 8 seconds.
Set the entry.
P.MODE
REPEAT
Press the REPEAT key.
REPEAT
(Twice)
Press the REPEAT key.
REPEAT
CD-406/DPF-R6030
CD-404/403/DPF-R4030/R3030
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no
more tracks can be programmed.
3
6
9
CD-406/DPF-R6030
CD-404/403/DPF-R4030/R3030
CD-406/DPF-R6030
CD-404/403/DPF-R4030/R3030
Repeated playback
PGM indicator lights up.
FILE
PGM MULTI
RANDOM
EDIT
AUTO
A B
PAUSE
1 2 3 4 5
REPEAT indicator lights up.
FILE
PGM MULTI
RANDOM EDIT DISC REPEAT
AUTO NO. TRACK NO.
A B
PAUSE
1 2 3 4 5
REPEAT indicator goes off.
FILE MULTI
PGM
RANDOM EDIT DISC REPEAT
AUTO NO. TRACK NO.
A B
PAUSE
1 2 3 4 5