Table of Contents
Advertisement
Menu system
Function of KDC-MP4036AX/KDC-MP3036AX/
KDC-MP336AX
Auxiliary Input Display Setting
Selecting the display when alternating to Auxiliary
input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/"AUX EXT" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Auxiliary input display setting mode
Push the Control knob towards [FM] or [AM].
Select the "NAME SET" display.
4
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The selected Auxiliary input display is displayed.
5
Select the Auxiliary input display
Push the Control knob towards [4] or [¢].
Each time you push the knob, the display alternates
as listed below.
• "AUX"/"AUX EXT"
• "DVD"
• "PORTABLE"
• "GAME"
• "VIDEO"
• "TV"
6
Exit Auxiliary input display setting mode
Press the [MENU] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• You can only set the Auxiliary input display when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used.
18
|
English
Text Scroll
Setting the displayed text scroll.
Display
Setting
"SCL AUTO"
Repeats scroll.
"SCL MANU"
Scrolls when the display changes.
⁄
• The text scrolled is listed below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
Function of KDC-MP4036AX/KDC-MP3036AX/
KDC-MP336AX
In Standby mode
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display
Setting
"AUX OFF"
When selecting the source there's no Auxiliary Input.
"AUX ON1"
When selecting the source there's Auxiliary Input.
When the unit is turned on by AUX source, the attenuator
"AUX ON2"
function is activated. Press [ATT] button to cancel the
attenuator function in order to listen to the external
equipment. there's Auxiliary Input.
⁄
• Setting to "AUX ON2" will not output the noise which is
produced when an external equipment is not connected
to the AUX terminal.
In Standby mode
CD Read Setting
When there is a problem with playing a CD with
special format, this setting plays the CD by force.
Display
"CD READ1"
"CD READ2"
⁄
• Some music CDs may not play even in the "CD READ2"
mode.
Setting
Play CD and Audio file.
Play CD by force.
Advertisement
Table of Contents
