System Q; Audio Control; Adjusting The Detail Of Audio Control - Mitsubishi MZ360119EX(DPXMP2090SM4 Instruction Manual

General features

System Q

Selecting the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
When you press the button once, the current
sound setting is displayed.
Each time you press the button, the sound
setting alternates.
Sound setting
Natural
User memory
Rock
Pops
Easy
Top 40
Jazz
• User memory: The values set on the <Audio Control>
(page 8).
• Change each setting value with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.

Audio Control

1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Basic Audio item
Turn the [VOL] knob.
8
|
English
Adjustment Item
Subwoofer level*
Bass level*
Middle level*
Treble level*
Balance
Fader
Exit Audio Control mode (Volume control mode)
• *
• *
Display
• *
"NATURAL"
"USER"
5
Exit Audio Control mode
"ROCK"
Press any button.
"POPS"
Press a button other than the [VOL] knob and
"EASY"
the [ATT] button.
"TOP40"
"JAZZ"
Adjusting the detail of Audio
Control
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 8).
2
Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Detail Audio item
Turn the [VOL] knob.
Display
1,2
"SW L"
3
"BAS L"
3
"MID L"
3
"TRE L"
"BAL"
"FAD"
1
You can control this item when <Switching preout>
(page 21) is set to "SWPRE SW".
2 You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
3 You can adjust these items in detail. Refer to
<Adjusting the detail of Audio Control>(Page 8).
Range
–15 — +15
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15